Compression
Sprayer designed for applying TAGINATOR & TAGAWAY liquid graffiti
removal products. A graffiti removal product such as TAGINATOR
requires an applicator that can withstand the chemical combinations it
contains. ETS Co. has designed a sprayer specifically for use with
TAGINATOR .This high impact resistant, two-gallon poly tank has a
rebuildable steel and poly pump assembly. The compression cup is
TAGINATOR compatible. All parts in the unit are available for
replacement.
Why buy a TAGSPAYER?
Almost all pump-up sprayers known as Garden sprayers or Bug
sprayers or even “Chemical Resistant” Compression Sprayers are made using
rubber parts and hoses made of what’s called Buna Rubber or Viton Rubber.
In this picture you can see what happens to these O-rings
when TAGINATOR is used through Compression Pump-up sprayers made with Buna or
Viton Rubber parts, hoses, O-rings and seals.
As you can see the rubber parts swell up and expand two,
three or more times their original size. Sometimes the rubber parts break down
and completely disintegrate.
This is not safe as the sprayers hose or seals may blow out
while under pressure and spraying the user with TAGINATOR on their clothing or
maybe even into their eyes. Certainly not good!
Hopefully no one get hurt using the wrong sprayer but
additionally you may also be stuck in the middle of a job without a working
sprayer. Not good either!
The bottom line is a TAGSPRAYER is about twice the cost of a
most decent Pump-Up Compression Sprayers. And using the wrong sprayer will
quickly ruin your sprayer and you will need to buy another.
So, now you have spent a lot money on two broken sprayers
and still don’t have one that works. The answer is to “Buy the Right Tool for the
job…get a TAGSPAYER!”
Last mention is, only use your TAGSPRAYER for applying
TAGINATOR! When you are done removing graffiti with your TAGPRAYER, give it a
quick water rinse and put it away until the next graffiti removal job.
If you have more question give us a call.
